A mineral is a naturally occurring substance containing a metal or its compounds. An ore is a mineral deposit from which extraction is economically practicable. Not every metal-bearing mineral is an ore under all economic conditions.
Extraction methods depend strongly on metal reactivity. Highly reactive metals such as aluminium require electrolysis of molten compounds. Less reactive metal oxides may be reduced by carbon or carbon monoxide; very unreactive metals can sometimes occur native.
Concentration removes some gangue before extraction. Roasting heats suitable sulfide ores in excess air, while calcination generally heats carbonates or hydrated ores in little or no air to form oxides. These preparatory steps are distinct from reduction of an oxide to metal.
Aluminium is too reactive for ordinary reduction of alumina by carbon. In the Hall–Héroult process purified alumina is dissolved in molten cryolite and electrolysed. Cryolite lowers the operating melting temperature and helps provide a conducting molten mixture.
The carbon-lined vessel serves as the cathode; carbon blocks are anodes. Aluminium ions gain electrons and molten aluminium collects at the bottom. Aluminium is denser than the electrolyte and can be tapped from the cell.
Oxide ions are discharged at the anodes. Oxygen reacts with the hot carbon anodes, producing mainly carbon dioxide, so the anodes are gradually consumed and must be replaced. The process consumes substantial electrical energy and needs careful control of alumina concentration.
An alloy is a metallic material containing a metal with one or more other elements. Brass contains copper and zinc; bronze commonly contains copper and tin. Changing composition can alter hardness, strength and resistance to corrosion.
Rusting of iron needs both oxygen and water. Painting, oiling or plastic coating separates the surface from these reactants. A damaged barrier can expose iron again, so coating integrity matters.
Galvanising coats iron with zinc. Zinc provides a barrier and can oxidise sacrificially when the coating is scratched because zinc is more reactive than iron. Tin is less reactive than iron, so a scratched tin coating does not provide the same sacrificial protection.